NHS Human Services, Inc.

Summary This is an engineering position with supervisory responsibilities located in support of a large complex geographical area in the state. The incumbent serves as area, zone or state engineer and is responsible for providing technical guidance and leadership in the overall planning, design, installation, and maintenance of the engineering phases of soil and water conservation practices as well as watershed flood protection programs. Relocation Incentive up to $40,000 Responsibilities Supervises the planning, design and construction of engineering practices. Interprets plans and specifications for contractors, solving problems at local level as to proper interpretation of specifications. Serves as or directs the contracting officer's representative for the administration of construction contracts. Provides production engineering leadership and direction to the assigned area and helps provide engineering continuity and coordination across areas. Makes site investigations and feasibility studies; field checks design as prepared/approved by the State Conservation Engineer (SCE) Recommends changes in designs, specifications, and schedules to accommodate conditions at construction site. Makes periodic quality reviews of notes, drawings, designs, and installations for compliance with policies, procedures, and/or specifications. Requirements Conditions of Employment Qualifications Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement including specialized experience and/or education, as defined below. Time in grade: Applicants must have one year of specialized experience at the next lower grade to be considered for the next higher grade (e.g. one year at the GS-9 grade level for consideration for the GS-11 grade level and e.g. one year at the GS-11 grade level for consideration for the GS-12 grade level). Basic Education Requirement: Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.; OR Combination of Education and Experience: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background is demonstrated by one of the following: 1) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in "A" above. 4) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting one of the Basic Requirements listed above, applicants must meet the following Minimum Qualifications Requirement in order to be considered: GS-11 Specialized Experience: To qualify for the GS-11 level, you must possess at least one year of specialized experience equivalent to the GS-09 level or higher in Federal service, or comparable experience not gained through Federal service. This experience must include: Providing technical agricultural engineering and/or civil engineering guidance on soil and water conservation issues or other related civil engineering storm water management, water quality, water quantity, or structural issues affecting farmers, landowners, municipalities, rural communities, private businesses or other parties; and/or Planning, designing, and/or coordinating the agricultural or civil engineering phases of vegetative or structural engineering practices, soil conservation practices, watershed flood protection practices, or localized storm water management practices; OR Substitution of education in lieu of specialized experience for the GS-11 level: 3 year(s) of progressively higher-level graduate education leading to a PH. D or equivalent doctoral degree in engineering or related field of study; OR Combination of Education and Experience: A combination of graduate-level education and experience, as described above, may be used to qualify for this position. This combination must have equipped you with the necessary knowledge and/or experience to successfully perform the duties of this position. Combinations of experience and education must total at least 100% as outlined in OPM Qualifications policy. GS-12 Specialized Experience: To qualify for the GS-12 level, you must possess at least one year of specialized experience equivalent to the GS-11 level or higher in Federal service, or comparable experience not gained through Federal service. This experience must include: Formulation of complex engineering planning Design and/or construction of agricultural engineering conservation practices Civil engineering vegetative practices, or civil engineering structural practices that address: natural resource protection, storm water management, waste management systems, irrigation efficiencies and/or water quality protection; and/or Coordinating and conducting agricultural or civil engineering quality control and/or quality assurance procedures through site investigations, site inspections, and feasibility studies and recommending changes when necessary. Note: There is no education substitution for the GS-12 level. For more information on the qualifications for this position, click here: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdfhttps://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education If you are relying on your education to meet qualification requirements: You must submit a copy of your transcripts to include course number, title, completion and grade. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. If a relevant course is not clearly qualifying (e.g. special topic, seminar, research, thesis, obscure or misleading course title, etc.), please submit an official course syllabi and/or detailed course description from the university/college for that particular course to ensure you are properly evaluated. Please note that qualifications determinations are based solely on the information submitted for each particular vacancy announcement. Important: If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. Click on this link for more information. Failure to provide all of the required documents/information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. Additional Information Career Transition Assistance Plan (CTAP) or Reemployment Priority List (RPL): Visit the OPM website for information on how to apply as a CTAP or RPL eligible. To exercise selection priority for this vacancy, CTAP/RPL candidates must meet the basic eligibility requirements and all selective factors. CTAP candidates must be rated and determined to be well qualified (or above) based on an evaluation of the competencies listed in the How You Will Be Evaluated section. When assessed through a score-based category rating method, CTAP applicants must receive a rating of at least 85 out of a possible 100. Promotion Potential: If you are selected for a position with further promotion potential, you will be placed under a career development plan, and may be non-competitively promoted if you successfully complete the requirements and if recommended by management. However, promotion is neither implied nor guaranteed. Physical Demands: The work requires some physical exertion such as long periods of standing, traversing steep slopes and rough construction sites, recurring bending and stooping, jumping across shallow ditches, walking in soft, muddy and slippery conditions, and lifting and carrying equipment and samples that weigh up to 50 pounds. Work Environment: Work is typically performed in an office setting, Frequent trips to field sites involve exposure to construction equipment and the environment, and extreme temperatures of hot and cold. Employees will be required to wear hard hats and observe necessary precautions on scaffolding, in trenches, and in the area of moving machinery, Exposure to noise levels common to construction sites with large earthmoving equipment can be expected. There will be exposure to disease carrying insects and irritating plants. PLEASE NOTE: In the interest of filling these positions as efficiently as possible, we are requiring the following: If called for an interview, applicants must be available to interview within 3 business days of being contacted. If a tentative job offer is extended, selectee will have 2 business days in which to accept or decline. This position is eligible for telework within the local commuting area of the position and other flexible work arrangements. Current USDA policy includes telework for an 8 hour work day, 4 days per week; other flexibilities are possible dependent upon availability and/or the position and its associated duties. Employee participation is at the discretion of the supervisor. Recruitment and/or relocation incentives may be authorized.